Lanat® Resistent
Lanat Resistent is a one-component, moisture-cured polyurethane intended for use either as a primer before applying any other Lanat product or as a topcoat on floors exposed to moderate to extreme conditions. Lanat Resistent has extremely strong adhesion and is highly durable. When used as a topcoat a color paste can be added to achieve the wanted color. It provides excellent abrasion resistance and chemical resistance. Exposure to sunlight will cause yellowing.
A dry and even concrete floor is necessary to get the perfect result.
The product will cure even at temperatures as low as 0°C. Usually Lanat Resistent is applied in two layers using a paint roller. The thickness of the final layer is about 0,1 mm. Prior to application, any damage and cracks in the substrate should be repaired.
Lanat® Nivelleringsmassa
Lanat Nivelleringsmassa is a two part, elastic and self leveling polyurethane coating. It is 100% solids, which means no solvent and this is important during
application.
Lanat Nivelleringsmassa can be used when the concrete is mechanical or chemical damaged, damaged by frost or crackled. A new surface on top of the concrete is created. The final surface needs to be protected using Lanat Resistent eventually in combination with a color paste.
The product has excellent crack-bridging properties and further cracking will be strongly reduced.
Lanat® Spackel
This product can be used when the concrete is mechanical or chemical damaged, damaged by frost or crackled but also to even out level differences when the concrete is at different levels. The product is thixotropic, which enables the design of a wedge.
The fact that the product is thixotropic also makes it suitable for continuously open joints where other products do not work.
Lanat® Fog Tix
Lanat® Fog Tix is a highly elastic sealant with high thixotropy. It is 100% solids. When using this product many different types of joints can be designed. The product is also suitable for continuously open joints where other products do not work.
Lanat® Gjutmassa
Lanat Gjutmassa is a product that is mixed with 75% quartz sand free from moisture. The result is a cost-effective coating with very high strength and good formability. It is easy to e.g. design a driveway at an opening. The material can absorb movements in the substrate and retains its strength even in thin layers